Graphite for Stirling Pistons

Moderator: stan.hornbaker

Forum rules
Be nice!
Post Reply
stirling___6617
Posts: 1
Joined: Mon Jun 28, 2004 9:25 am
First Name: Jerry
Last Name: Smith

Graphite for Stirling Pistons

Post by stirling___6617 »

Can someone suggest a source for the graphite suitable for machining
into pistons for Stirling motors. Rod should be < 1" in
diameter...I've found some industrial sources but they want to sell
it in larger quantities than I need.


Thank you,
stan.hornbaker
Posts: 532
Joined: Thu Jun 20, 2002 6:01 pm
First Name: William S.
Last Name: Hornbaker

Machinable graphite stock

Post by stan.hornbaker »

E-Bay has a few items of "Graphite Block" curently.
A web search for machinable graphite and similar terms will turn up manufacturers and distributors. Call or email for information.
Check jerry-howell.com and send him a email asking is he can suggest sources. Search for Stirling Mecca and email inquiry.
If you didn't know, graphite machines nicely but is very dirty.
spdnh
Posts: 1
Joined: Sat Apr 09, 2005 9:33 pm
First Name: steve
Last Name: doherty

Response to Graphite for Stirling Pistons

Post by spdnh »

hi there I have alot of grapphite available rods included please email me steve at spdnh@aol.com

I hope to hear from you soon
melton-c
Posts: 1
Joined: Sun Apr 23, 2006 11:49 am
First Name: charles
Last Name: melton

Response to Graphite for Stirling Pistons

Post by melton-c »

www.graphitestore.com

Has always worked for me many times. everything you need that's graphite is there at the better prices .
Post Reply