A potential source of rigid plastic to make an LTD Displacer Cylinder
is to be found in the housewares/kitchenwares section of department
stores and the large sprawlmart stores.
Look for the vertical storage jars with a clamp down sealable top.
Select the appropriate size and cut to length on a band saw or table saw.
Finish the cut edges with 65/80, & 100/100+ sandpaper or wet or dry
paper with water.
LTD Displacer Cylinder Plastic Material Source
Moderator: stan.hornbaker
Forum rules
Be nice!
Be nice!
-
- Posts: 532
- Joined: Thu Jun 20, 2002 6:01 pm
- First Name: William S.
- Last Name: Hornbaker