info wanted

Moderator: stan.hornbaker

Forum rules
Be nice!

info wanted

Postby luka1222 » Mon Jan 12, 2009 9:26 am

Hi, thanks in advance for any info you guys can give me, i am
interested in understanding and biulding a Stirling engine of my
own. i have a complete workshop so thats not a problem, i just
wanted some hints as to any books or websites out there that will be
able to give me the info i need to design and biuld my own engine
considering that i am a complete beginner. thanks
luka1222
 
Posts: 3
Joined: Mon Jan 12, 2009 9:22 am
First Name: lewis
Last Name: evans

Info Wanted

Postby stan.hornbaker » Mon Jan 12, 2009 10:21 am

The purpose of the Stirling engine will determine the route you must follow. For a Model Stirling engine there is a large amount of information available on the web by searching for "Stirling engine models" and variations of that search term. You will find many links at NotSCar.wik.is for web sites with extensive information on Stirling engine models. Exploring http://royuk.co.uk/engines.htm should be very helpful for a start.

If you are serious about building a Power Producing Stirling Engine, look in the Power Producing Stirling Engine forum for same and the last entries in the forum, the one from and reply to Igor under topic "displacer/cylinder volume ratio?" at or near bottom of list.
stan.hornbaker
 
Posts: 532
Joined: Thu Jun 20, 2002 6:01 pm
First Name: William S.
Last Name: Hornbaker


Return to Model Stirling Engines

Who is online

Users browsing this forum: No registered users and 1 guest

cron