Stirling Heat Pump

Moderator: stan.hornbaker

Forum rules
Be nice!
Post Reply
kkoprubasi
Posts: 1
Joined: Tue Aug 11, 2009 7:22 am
First Name: Kerem
Last Name: Koprubasi

Stirling Heat Pump

Post by kkoprubasi »

Hello,

I am looking for some resources on electrically driven Stirling heat
pumps. Is it possible to simply reverse drive a Stirling engine using
an electric motor and reject heat at the hot end? Or would you need to
change the heat exchanger configuration to be able to do that? I have
seen a few studies where the Stirling engine drives a heat pump but
this would be a different configuration. I am also wondering how large
of a temperature differential is achievable for such application.

Thanks.
stan.hornbaker
Posts: 532
Joined: Thu Jun 20, 2002 6:01 pm
First Name: William S.
Last Name: Hornbaker

Stirling Heat Pump

Post by stan.hornbaker »

Stirling engines are not used in place of conventional heat pumps. They are used however as cryocoolers in reaching very low temperature in the processing of liquid gasses.

The following two links will take you to sources of some helpful design and graphic solutions.

"Fast Track" Nomographs/Alignment Charts for Stirling Engine Design.

http://web.me.com/allan.j.o/Communicabl ... Track.html

Dr. Izz. Fall 2009 Stirling engine curriculum at Ohio State U.

http://www.ent.ohiou.edu/~urieli/


Post Reply