Has anyone made a speaker driven piston?

Moderator: stan.hornbaker

Forum rules
Be nice!

Has anyone made a speaker driven piston?

Postby george.j.bugh » Wed Mar 03, 2004 7:55 am

Has anyone made a speaker driven piston?

I'm not talking about the systems that create acuostic standing waves
and all that. I'm just wondering if anyone has had success with like
using a long throw woofer to drive the linear Stirling power and/or
displacer pistons. Sometime like the 2000 watt long throw from Swiss
Audio for $199 at ebay:

http://www.swissaudioinc.com/woofers/spw.html ?

If yes then can some give a link to a speaker Stirling where the
speaker is the linear alternator to take off electrical power?

Right now I'm just exploring many different Stirling designs trying to
see a very easy to build version with good power, good efficiency and
low maintenance.
george.j.bugh
 
Posts: 7
Joined: Thu Feb 26, 2004 3:30 pm
First Name: George
Last Name: Bugh

Response to Has anyone made a speaker driven piston?

Postby george.j.bugh » Wed Mar 03, 2004 11:22 am

OK, I said I wasn't interested in standing waves and all that but now I see that making waves is easier that physical pistons, except it looks like I need traveling waves more than standing waves according to the information at:

http://64.106.253.12/PDFs/university-forum/acoustic-laser.pdf

But I need to study this more. The title is acoustic laser but it includes acoustic Stirling engine information also.
george.j.bugh
 
Posts: 7
Joined: Thu Feb 26, 2004 3:30 pm
First Name: George
Last Name: Bugh

Response to Has anyone made a speaker driven piston?

Postby rtopf » Tue Jun 01, 2004 1:59 pm

Using a speaker for a drive is an idea that has been kicked around for a while. The limit to power is going to be the operaing temp of the spaeaker materials. The foam surround and most cone materials are not designed to withstand temputures much over ambient air temp. Without higher temp capabilities, you won't get enough power from the power cylinder to drive the displacer(something all kinimatic engines do).

Rick
rtopf
 
Posts: 21
Joined: Fri Jun 28, 2002 6:49 am
First Name: Richard
Last Name: Topf

Response to Has anyone made a speaker driven piston?

Postby fvanicek » Mon May 22, 2006 5:39 pm

What about disassembling the woofer and using only the huge and strong permanent magnet and the coil?
fvanicek
 
Posts: 16
Joined: Fri May 19, 2006 3:48 am
First Name: Frank
Last Name: Vanicek

Response to Has anyone made a speaker driven piston?

Postby jol.andre » Wed Jan 13, 2010 10:21 pm

I'd rather see a woofer as a very cheap and efficient linear alternator for a free-piston Stirling.

jol.andre
 
Posts: 6
Joined: Wed Jan 13, 2010 9:57 pm
First Name: Andre
Last Name: Jolicoeur


Return to Power-producing Stirling Engines

Who is online

Users browsing this forum: Google [Bot] and 2 guests

cron