A MTD Liquid Piston Stirling Engine

Moderator: stan.hornbaker

Forum rules
Be nice!
Post Reply
stan.hornbaker
Posts: 532
Joined: Thu Jun 20, 2002 6:01 pm
First Name: William S.
Last Name: Hornbaker

A MTD Liquid Piston Stirling Engine

Post by stan.hornbaker »

For waste heat at temperatures of circa 220 C, 400 F.

A MTD (200 C) Liquid Piston Stirling Engine has been built with
information posted on the internet.
The basic page:
More detais:
There are many links to more information.
Do not miss movie and animation links at bottom of the prototype page.

The liquid pistons are liquids in the "u" tubes which oscillate at
about 1 Hz! The small pistons in the horizontal tube are for
extracting power.
The basic unit can be connected to operate as an integral engine-cooler.
Two of the four cylinder units Make a better engine-cooler.
jayskala
Posts: 1
Joined: Sat Mar 11, 2006 12:56 pm
First Name: jason
Last Name: skala

Response to A MTD Liquid Piston Stirling Engine

Post by jayskala »

Excellent site. Will let you know when it is all in English. Should keep us busy for some time. Will let you know when we get it together. Thank you again for your kind advice. Jason and Dylan
Post Reply