A MTD Liquid Piston Stirling Engine
Posted: Fri Apr 07, 2006 12:15 pm
For waste heat at temperatures of circa 220 C, 400 F.
A MTD (200 C) Liquid Piston Stirling Engine has been built with
information posted on the internet.
The basic page:
More detais:
There are many links to more information.
Do not miss movie and animation links at bottom of the prototype page.
The liquid pistons are liquids in the "u" tubes which oscillate at
about 1 Hz! The small pistons in the horizontal tube are for
extracting power.
The basic unit can be connected to operate as an integral engine-cooler.
Two of the four cylinder units Make a better engine-cooler.
A MTD (200 C) Liquid Piston Stirling Engine has been built with
information posted on the internet.
The basic page:
More detais:
There are many links to more information.
Do not miss movie and animation links at bottom of the prototype page.
The liquid pistons are liquids in the "u" tubes which oscillate at
about 1 Hz! The small pistons in the horizontal tube are for
extracting power.
The basic unit can be connected to operate as an integral engine-cooler.
Two of the four cylinder units Make a better engine-cooler.