Solid State Heat Differential to Energy Conversion

Moderator: stan.hornbaker

Forum rules
Be nice!
Post Reply
andys
Posts: 1
Joined: Tue Oct 24, 2006 5:34 am
First Name: Andrew
Last Name: Shapiro

Solid State Heat Differential to Energy Conversion

Post by andys »

I know that this forum is all about Stirling, but I though it would
be the best place to ask if anyone knows of a process by which heat
differential can be converted to electrical energy without a
mechanical intermediary. Like electron flow between poles of a
battery, what energy moves between the hot side and the cold side of
a heat conducting material as it distributes the heat? Is air the
only medium that people have tapped for this? Where should I look for
more information on this?
bptdude___2569
Posts: 177
Joined: Sat Jan 13, 2007 3:31 am
First Name: Joe
Last Name: McLean

Response to Solid State Heat Differential to Energy Conversion

Post by bptdude___2569 »

yes, it is called the Peltier–Seebeck effect.

Here is a little wood stove top fan using it.
https://www.gyroscope.com/d.asp?product=ECOFAN2

From what I have read, it is usefull for non-power producing application, such as sensor electronics and signal devices.

While much research is done on photon-electric conversion, there is not much activity in thermal-electric conversion.

paraplegic.racehorse
Posts: 1
Joined: Sat Apr 04, 2009 2:31 pm
First Name: Charles
Last Name: Reynolds

Response to Solid State Heat Differential to Energy Conversion

Post by paraplegic.racehorse »

What you described is, essentially, a thermocouple and many automotive sensors already use this to generate low-voltage signals which are then processed by the onboard computer for fault monitoring.

The only place I can see such a comparative thermocouple useful is in basic heat exchangers such as used in refrigeration applications. There, it would be useful as a state-monitoring device to watch for a decline in efficiency and, thus, when to add or replace the refrigerant.
Post Reply