LTD Displacer Cylinder Plastic Material Source

Moderator: stan.hornbaker

Forum rules
Be nice!
Post Reply
stan.hornbaker
Posts: 532
Joined: Thu Jun 20, 2002 6:01 pm
First Name: William S.
Last Name: Hornbaker

LTD Displacer Cylinder Plastic Material Source

Post by stan.hornbaker »

A potential source of rigid plastic to make an LTD Displacer Cylinder
is to be found in the housewares/kitchenwares section of department
stores and the large sprawlmart stores.
Look for the vertical storage jars with a clamp down sealable top.
Select the appropriate size and cut to length on a band saw or table saw.
Finish the cut edges with 65/80, & 100/100+ sandpaper or wet or dry
paper with water.
Post Reply